What are the precautions for using hydraulic hoses in low temperature environments?

Hydraulic systems play a vital role in various industrial applications, and hydraulic hoses, as one of the important components in hydraulic systems, have a direct impact on the performance and reliability of the entire system. However, when hydraulic systems operate in low-temperature environments, hydraulic hoses face a series of special challenges. This article will explore in detail the precautions for the use of hydraulic hoses in low-temperature environments to ensure that they can still work stably and reliably under extreme conditions.

The materials of hydraulic hoses usually include rubber (such as nitrile rubber, chloroprene rubber, etc.) and metal (such as steel wire). The performance of these materials will change in low-temperature environments, so special attention needs to be paid.

1. The impact of low-temperature environments on hydraulic hoses

Material embrittlement: In low-temperature environments, the elasticity and flexibility of rubber materials will be significantly reduced, causing the materials to become hard and brittle. This will increase the risk of cracks and breaks in hydraulic hoses during use.

Decreased sealing performance of joints: Low temperatures will cause the sealing materials of hydraulic hoses and their joints to shrink, thereby reducing the sealing performance. If the seal is not tight, hydraulic oil may leak, affecting the normal operation of the system.

Shortened pulse fatigue life: In low-temperature environments, the pulse fatigue life of hydraulic hoses will be significantly shortened. This is because low temperatures increase the stress concentration of materials and accelerate the formation and expansion of fatigue cracks.

Decreased bending performance: Low temperature will increase the bending radius of the hydraulic hose and reduce its flexibility. This will not only affect the installation and use of the hose but may also cause the hose to rupture at the bend.

2. Precautions for the use of hydraulic hoses in low-temperature environments

Choose appropriate materials: In low-temperature environments, hydraulic hoses with good low-temperature resistance should be selected. For example, nitrile rubber (NBR) and chloroprene rubber (CR) have good flexibility and elasticity at low temperatures and are ideal choices. At the same time, the material of the reinforcement layer should also be considered to ensure that it can still provide sufficient strength and pressure resistance at low temperatures.

Pay attention to the temperature range: When selecting a hydraulic hose, it is necessary to ensure that its operating temperature range meets the actual application requirements. Generally speaking, the temperature range of hydraulic hoses should be between -40℃ and +100℃. For extremely low-temperature environments, specially designed low-temperature-resistant hydraulic hoses can be selected, and their operating temperatures can be as low as -60℃ or even lower.

Maintain an appropriate bending radius: In low-temperature environments, the bending radius of the hydraulic hose should be appropriately increased to avoid stress concentration and rupture caused by excessive bending. It is recommended to install and use according to the recommendations in the product specification, ensuring that the radius of curvature of the hose at the bend is not less than the specified value.

Avoid sudden temperature changes: Sudden temperature changes can cause thermal shock to hydraulic hoses, leading to material aging and damage. Therefore, when using hydraulic hoses in low-temperature environments, sudden temperature changes should be avoided as much as possible. For example, before starting the equipment, you can preheat the hydraulic system to gradually warm up the hydraulic oil, and then start the equipment.

Regular inspection and maintenance: In low-temperature environments, the maintenance of hydraulic hoses is particularly important. The appearance of the hose should be regularly checked for cracks, wear or other signs of damage, and damaged hoses should be replaced in a timely manner. In addition, the sealing performance of the joints should be regularly checked to ensure that there is no leakage.

Prevent freezing: In extremely low temperature environments, the hydraulic oil may freeze, causing the hydraulic system to fail to work properly. To prevent this from happening, antifreeze can be added to the hydraulic system, or hydraulic oil with a lower freezing point can be selected. In addition, a heating device can be installed in the hydraulic system to keep the temperature of the hydraulic oil within a safe range.

Avoid mechanical damage: In low temperature environments, the flexibility and elasticity of hydraulic hoses will decrease, making them more susceptible to mechanical damage. Therefore, during installation and use, the hose should be prevented from contacting with sharp objects to prevent scratches or punctures. At the same time, the hose should be prevented from being overstretched or compressed to avoid permanent deformation.

Reasonable design of the pipe layout plan: In low-temperature environments, the pipe layout plan of hydraulic hoses should be more reasonable. The hose should be avoided from being too long or too short to ensure that it is not subjected to excessive tension or pressure during operation. At the same time, the hose should be prevented from rubbing or colliding with other components to prevent damage.

Choose the right type of connector: In low temperature environments, the choice of connectors is also very important. Connectors with good low temperature resistance should be selected and ensure that they match well with hydraulic hoses. Common connector types include ferrule connectors, JIC37 degree connectors, tail end molded connectors (Walform), etc. When selecting connectors, they should be selected according to specific application scenarios and requirements.

Pay attention to installation details: When installing hydraulic hoses, pay attention to the following details:

Ensure that the connectors are tightly connected and leak-free;

Avoid twisting or excessive bending of the hose;

Use markings to determine whether the hose is twisted;

Take fixed measures to prevent twisting in multi-plane movement.

The use of hydraulic hoses in low-temperature environments requires special attention to many aspects, including selecting suitable materials, maintaining appropriate bending radius, avoiding drastic temperature changes, regular inspection and maintenance, preventing freezing, avoiding mechanical damage, reasonably designing pipe layout solutions, selecting suitable joint types, and paying attention to installation details. By following these precautions, it can be ensured that the hydraulic hose can still work stably and reliably in low-temperature environments, thereby improving the performance and safety of the entire hydraulic system.

As a hydraulic hose company from China, we are well aware of the challenges hydraulic hoses face in low-temperature environments. Therefore, we focus on the research and development of hydraulic hoses with excellent low-temperature resistance, using high-quality materials and advanced processes to ensure that the products can maintain stable and reliable performance under extreme conditions. We are committed to providing customers with customized solutions to meet the needs of different application scenarios and provide high-quality hydraulic hose products and services to global customers through strict quality control and continuous technological innovation.

www.tianyiindustry.com
Zaozhuang Tianyi Industry Co., Ltd.,